We have developed and produced OCTAVE devices since 1986 in Germany. Our product lines have an average duration of 5 - 10 years before changes make a new model appear useful. We undertake service for all devices and offer special upgrades for some of our models after the end of production, like e.g. the MKII Upgrade for the V50 and the MKIV Upgrade for the HP500. Casing parts are also on stock or can be produced on demand. Consequently, an OCTAVE device can always be repaired with original parts.
Stereo Power Amplifier RE 290
Production: 2011 - 2017
OCTAVE proudly presents the latest evolution of the successful and enduring RE 280 stereo amplifier. The company's traditional stereo amplifier design has been produced since 1990, having been updated and improved continuously over the years. This progressive development has brought forth an even further improved variant in the form of the new RE 290 power amplifier – an ideal companion for any and all modern high-performance loudspeakers.
Mono Power Amplifier MRE 130
Production: 2004 - 2017
The MRE 130 mono amplifiers are push-pull power amps in pentode configuration, producing approximately 140W per channel at 2% THD. The MRE 130 monos are designed to reproduce the vast scale of a large orchestra in its entirety. From the deepest bass, to the highest note- all the musical information is conveyed without loss of dynamic details. Raw emotion, stunning detail and rich voices - the MRE delivers fireworks.
Preamplifier HP 500 SE
Production: 2003 - 2017
OCTAVE recently developed the SE (Special Edition) version to mark the 25th anniversary of Stereoplay magazine, which first tested the original HP 500 in 1989. The SE brings the HP 500 preamp back to the current state-of-the-art once more. The use of two EF 184 pentodes provides the output stage of the HP 500 SE with a significantly greater bandwidth (0.2 Hz to 2.3 MHz, 6 dB).
Preamplifier HP 300 MK2
Production: 2007 - 2016
The HP 300 MKII belongs to a new generation of OCTAVE preamps derived from the experience gained during the development of the Jubilee preamp. The implementation of a Super Gain/ High Current Output Stage technology improves the line amplifier in all aspects, offering extremely low distortion and very low output resistance. Perhaps the most important aspect is that the sound quality of the tube based stage is independent of the output load and the cable capacitance. The power supply is specifically designed for the HP 300 and includes a highly efficient, low magnetic stray-field transformer. The extensive features of the HP 300 MKII make it an ideal preamp for any high-end audio system.
Integrated Amplifier V 110
Production: 2012 - 2016
The Octave V 110 integrated amplifier is a push-pull pentode design delivering 2 x 110 W RMS output power (into 4 ohm loads). As with all Octave models, all research and development (R&D) and production has been conducted exclusively in-house, and the amplifier is comprehensively safeguarded against user error and parts wear – including catastrophic power tube failure. The V 110 is a new member of KT 120 based amplifiers containing our proprietary Amplifier Technology. Ultra Low Noise and precise regulated Power Supply voltages ensure stable operation independent of mains fluctuations and high frequency noise distortions of the mains voltage. The V 110 improves upon the V 70 SE predecessor, with upgrades made in the amplification stages as well as the power supply. Ultra-low leakage Tantalum electrolytic caps are now used instead of Aluminum electrolytic caps in the driver circuit.
Integrated Amplifier V 80
Production: 2008 - 2015
The V 80 line level integrated amplifier is a completely new development, with the output stage based on the concept of the OCTAVE MRE 130 mono amplifier. His outstanding characteristic is an unbelievably melodic timbre and his unshakable performance. He reproduces any music with authority and natural elegance, instantly captivating the listener. Fundamental notes, warmth, three-dimensionality and speed, the V 80 plays music effortlessly and with pure joy. "Watt is not the same as Watt": At dynamic peaks, when other amplifiers begin to collapse, the V 80 truly comes to life. It is not without reason that the V 80 won the highly respected "Jazz Component Award" in Japan (as the best overseas component) in 2008 and next the Pure Audio Grand Prix Award in 2009. The V 80 transcends far beyond the technical and tonal attributes of the V 40SE and V 70SE integrated amplifier models, and performs without peer in its own exalted league. He is built for listeners who don't want to install big pre- and power amplifier combinations, but who have the highest expectations and requirements regarding sound quality and system functionality. As the top of the line OCTAVE integrated amplifier offering, the V 80 contains all the features modern entertainment equipment requires for convenience and connectivity.
Integrated Amplifier V 40
Production: 2002 - 2009
With its V 40, OCTAVE surprises music fanciers who have been dreaming for a long time a tonally sophisticated, long-living and affordable tube amplifier. The fact that this cheapest OCTAVE amp ever corresponds in every respect to our strict quality requirements, is guaranteed by a circuit concept that is unique in this price category. An optimum stabilization, monitoring and control of the amp circuits is assured by a newly developed electronics based upon MOSFET power transistors. This allows the V 40 to exhaust valiantly the undisputed audiophile advantages of tube technology – without cutting back on reliability.
Stereo Power Amplifier RE 280
Production: 1990 - 1991 (RE 270); 1991 - 1993 (RE 275); 1993 - 2001 (RE 280); since 2001 (RE 280 MK2)
The OCTAVE stereo output stage RE 280 impresses with body of its sound. Its three-dimensionality, its firm and deep basses also reproduce the "sound behind the sound” clearly and distinctly. As the ideal completion of the OCTAVE preamps it offers the arena for music from Albinoni to Zappa. The heart of the RE 280 is a pull-push output stage with high ability to supply power. The ultralinear circuit and the oversized, highly stable power supply unit make it especially suitable for low-ohm speakers like B & W, Martin Logan etc. The powerful and controlled ability of bass reproduction to less than 20 Hz by sophisticated nested output transformers from our own production is impressing.
Preamplifier HP 500
Production: 1987 - 1992 (HP 500); 1991 - 2002 (HP 500 MK2); 2001 - 2006 (HP 500 MK3);
since 2003 (HP 500 SE).
bildThe HP 500 has been produced since 1987. Many detailed improvements and changes have been included during these years and have made it tonally even more attractive. The current MK3 version is e.g. serially equipped with an external power supply. XLR output with transformer symmetrization and the further developed phono part are options making the device one of the most universal tube preamps of our times. Of course older models can be upgraded to innovations.
Vorverstärker HP 300
Production: 2001 - 2007 (HP 300); since 2007 (HP 300 MK2)
The circuit concept of the HP 300 originates from the reference preamp of the Jubilee line that has been highly praised by the HiFi specialist press. Like in our top model, also in the HP 300, tubes as amplifying elements have the central, tonally crucial role. Moreover, new passive supergain semiconductor circuits guarantee the required load stability at the output. The promising combination of tubes and transformers in our newest preamp results in measurable and audible advantages. Since OCTAVE realizes the interface to the output stages with semiconductor circuits, the HP 300 convinces by outstanding measurement results. Delivered from output charge, the tubes can develop uninhibitedly their tonal and dynamic sound characteristics.

Preamplifier HP 200
Production: 1992 - 2001 (HP 200 with optional Phono MM/MC);
1994 (HP 200 with external Power Supply); from 1995 (HP 200 Phono MK2)
The tube preamp HP 200 was produced from 1992 to 2002. Its concept is based upon the OCTAVE hybrid circuit in connection with the combined power supply control electronics. Specialization of the hybrid circuit enabled an amplifier concept that needs an operating voltage of only 150 V. This allowed development of an economical version of the successful HP 500. The device has a multi-level soft-start electronics which excludes switching and operating errors. In case of mains oscillations or power breakdown, the device switches off. For tube exchange, no adjustment is required.
Stereo Power Amplifier V 50 E
Production: 1997 - 2003 (V 50); 2003 - 2005 (V50 MK2)
The output stage V 50 E is identical to the output stage of the integrated amp V 50. That is why data and test results of the integrated amp V 50 apply to this device also. The advancement of the OCTAVE power supply (and amplifier) electronics allowed a new generation of tube amps setting benchmarks in this price category. Essential points of this new technology are auto-BIAS electronics and in the amp technology the abandonment of overall negative feedback as far as possible. The latter is of utmost importance for correct timing of the music signal. Conception and casing mechanics of the new series follow strictly functional aspects. We considered the tonal result more important than a sophisticated and costly design.
Integrated Amplifier V 50
Production: 1997 - 2003 (V 50); 2003 - 2005 (V 50 MK2)
Derived from the technology in the OCTAVE Jubilee reference output stages, an elaborate stabilization of supply and control voltages of the type EL 34 pentode output tubes results in another audibly increased sound quality. In the control circuit of the V50 upgrade, two high voltage FET transistors provide absolutely stable voltages. Another modification with relevance to sound is consistent supply of the tube heating with optimized DC voltages. In rectification, Schottky diods and filter capacitors with 60,000 µF are employed. This additional stabilization and rectification of all operating voltages results in clearly improved measurement results. The signal-to-noise ratio increases by rich 10 dB. With a sensational value of -98 dB, the V50 MK II can confidently defy even excellent transistor devices. While in conventional amps noise and ripple grow with increasing power output and are only covered by the music, in the OCTAVE V50 MK II these interference factors remain independent of volume on a constantly low level.
Mono Power Amplifier MRE 120
Production: 1994 - 2004 (MRE 120), since 2004 (MRE 130)
bildPush-pull mono output stages with new driver electronics for control of output tubes. The new concept achieves improved impulse reaction for complex charges and reduced distortion especially for low charge impedances. Suitable for speakers like Martin Logan, Avalon, Audio Physik, Caldera, Isophon Vertigo, Europa, ...
Mono Power Amplifier M 100
Production: 1997 - 2000
The output stage of the tube mono output stage M 100 is a further development of the output stage of the integrated amp V 50. In this output stage concept, a new phase shifter concept is implemented to eliminate the system-inherent disadvantages of traditional push-pull output stages. The DC-coupled phase shifter is constant up to about 4 MHz and does therefore not impair at all the total reaction of the output stage. Phase constancy of the output stage also leads to stability for complex charges, as is unique for tube output stages. The reaction at the threshold of the transfer range (deep bass, high frequency) is now constant. Attenuation and distortion are largely independent of frequency.
Production: 1994 - 1999
The phono module is an independent analog phono preamp for integrated amps or preamps without phono input. In the phono module, the phono component from our preamp HP 200 MM/MC/MKII is employed. The MKII phono component is a further development of our hybrid phono technology. The further development consists in realization of the amplifier stage required for RIAA equalization with three tubes, not with two tube systems as usual. Only implementation of three tubes in the RIAA equalizer allows exact adherence to the RIAA curve and guarantees a consistently low distortion level from 10 Hz upwards. The sound pattern in the fundamental sound becomes immensely precise and three-dimensional.
Filter II
Production: 1994 - 1997
The OCTAVE power line filter, Filter II, is based on the knowledge that an effective sound improvement is only possible by real separation of the devices from mains (simulation of accumulator operation). Traditional LC-filters do attenuate high frequency interferences, but low frequency interferences and equalizing currents due to “normal” power supply units of devices are not prevented. These equalizing currents are parasitic currents flowing in the signal wires between the devices and definitely having negative impact upon sound.
^ top